Ultra-Long-Range Jet · NYC MIA

Gulfstream G600 Charter

Published

The Gulfstream G600 pairs a modern Symmetry flight deck with a long cabin and a Mach 0.90 cruise. Its 6,600-nautical-mile range makes the roughly 950-mile New York to Miami corridor a brief leg, a small share of the aircraft's capability. The finished cabin is what you charter it for, with the range holding Miami open as a connection for a nonstop continuation.

  • 6,600 nm range
  • 516 ktas cruise
  • 12–16 passengers
From $46,000 one-way, all-in
Gulfstream G600 Charter — charter from New York to Miami

Private charters on the New York–Miami corridor depart from Teterboro Airport (TEB), Westchester County Airport (HPN), Morristown Municipal Airport (MMU) or Republic Airport (FRG), and arrive at Miami-Opa Locka Executive Airport (OPF), Fort Lauderdale Executive Airport (FXE), Miami International Airport (MIA) or Palm Beach International (PBI).

G600 specifications

Manufacturer performance figures — Gulfstream.

6,600 nm
Max range
516 ktas
Cruise speed
12–16
Passengers
6 ft 2 in
Cabin height
175 cu ft
Baggage
51,000 ft
Service ceiling

Specification

Range is 6,600 nautical miles against a route near 950, flown nonstop with the cabin full and large reserves. Cruise is 516 ktas, Mach 0.90, among the fastest here. The ceiling is 51,000 feet. Power is two Pratt & Whitney PW815GA engines, managed from the Symmetry flight deck.

Cabin

The cabin measures 45 feet 2 inches long, 7 feet 7 inches wide and 6 feet 2 inches high. Separate work, dine and rest zones are served by a full galley and a dedicated cabin attendant. Twelve to sixteen passengers fly in the standard fit, nineteen at maximum, with 175 cubic feet of baggage.

On this route

On New York to Miami the G600 delivers a fast, modern long-range cabin for a two-hour flight. Its peers here are the flagship Gulfstream G650ER and the proven Gulfstream G550; the ultra-long-range class page compares them. Leaving Teterboro Airport (TEB), the same aircraft can continue intercontinental nonstop from Miami.

  • 6,600 nm range — Miami is a fraction of its reach
  • Mach 0.90 cruise, among the fastest in the group
  • Modern Symmetry flight deck, separate cabin zones
  • Nonstop onward from Miami to intercontinental cities
Gulfstream G600 cabin with separate living zones for a New York to Miami charter Gulfstream G600 on a private ramp before a New York to Miami flight

Other Ultra-Long-Range Jets for the NYC–MIA route

Charter services for the New York–Miami route

Frequently asked questions

What does a Gulfstream G600 charter from NYC to Miami cost?

A one-way G600 runs about $46,000 to $69,000 all-in, depending on date and availability. The price includes fuel, fees and taxes.

Can the G600 fly internationally nonstop from Miami?

Yes. With 6,600 nautical miles of range it can leave Miami for Europe or South America nonstop on the same aircraft, treating Miami as a connection rather than a stopping point.

How fast is the G600 on the NYC to Miami route?

It cruises at Mach 0.90, among the quickest in this class, covering the roughly 950-mile corridor in just over two hours from the Symmetry flight deck.

Ready to fly New York to Miami?

Send your dates and party size for all-in pricing across suitable aircraft — typically within two hours, with no obligation.